skip to Main Content

DHX –DISCONTINUED–

This product is currently out of stock and unavailable.

Or

Rated 0 out of 5
(be the first to review)
Description

THIS PRODUCT HAS BEEN DISCONTINUED
Check out the CTS Wireless mic System

Configurations

DHXR
This includes the DHXR Receiver, Antennas, 1/4" to 1/4" cable, Power Supply, Rack Ears, and Screws.

 

DHXR/HH65
This system includes the DHXR Receiver, the HH65 Handheld Transmitter, Antennas, 1/4" to 1/4" cable, Power Supply, Rack Ears, and Screws.

Additional products in this configuration:

 

DHXR/HH65SC
This system includes the DHXR Receiver, the HH65SC Handheld Transmitter, Antennas, 1/4" to 1/4" cable, Power Supply, Rack Ears, and Screws.

Additional products in this configuration:

 

DHXR/77HS
Headset Mic: Uni-directional, Frequency Response 50Hz-18kHz. This system includes the DHXR Receiver, MBP77 Body Pack Transmitter, the HS-U3BK Headset Microphone, Antennas, 1/4" to 1/4" cable, Power Supply, Rack Ears, and Screws.

Additional products in this configuration:

 

DHXR/77LV
Lavalier Mic: Uni-element, Frequency Response 50Hz-19kHz. This system includes the DHXR Receiver, MBP77 Body Pack Transmitter, the LV-U3BK Lavalier Microphone, Antennas, 1/4" to 1/4" cable, Power Supply, Rack Ears, and Screws.

Additional products in this configuration:

 

DHXR/77GTR
Guitar Cable: Guitar/Instrument Cable, 1/4" to mini XLR connector, TA3F connector, use with Guitar or Bass Guitar. This system includes the DHXR Receiver, the MBP77 Body Pack Transmitter, the AS-GTR Guitar Cable, Antennas, 1/4" to 1/4" cable, Power Supply, Rack Ears, and Screws.

Additional products in this configuration:

 

DHXR/77
Body Pack: This system includes the DHXR Receiver, MBP77 Body Pack Transmitter, Antennas, 1/4" to 1/4" cable, Power Supply, Rack Ears, and Screws.

Additional products in this configuration:

 

Accessories

HH65SC Super Cardioid Condenser Wireless Handheld Microphone

HH65SC Super Cardioid Handheld Condenser Microphone Transmitter for the DHX/DHXR4 Wireless Microphone System

  • Super Cardioid with Condensor
  • LCD Display (4 Bar Battery Life Indicator, Group, and Channel Indicator)
  • IR Sync Transmitter to Receiver
  • 10 mW
  • Gain Adjustment
  • Works with WMC-CGR Charger Station
  • Operated on 2 AA Batteries (up to 6 hours Alkaline)
  • Dimensions: 9.6" x 2" (243 x 50 mm) (LxDia)
  • Weight: 10.6 oz (300 g)

HH65 Dynamic Wireless Handheld Microphone

HH65 Handheld Cardioid Dynamic Mic Transmitter for the DHX/DHXR4 Wireless Microphone System

  • Cardioid Dynamic Element
  • LCD Display (4 Bar Battery Life Indicator, Group, and Channel Indicator)
  • IR Sync Transmitter to Receiver
  • 10 mW
  • Gain Adjustment
  • Works with WMC-CGR Charger Station
  • Operated on 2 AA Batteries (up to 6 hours Alkaline)
  • Dimensions: 9.5" x 2.1" (242 x 54 mm) (LxDia)
  • Weight: 10.6 oz (300 g)

MBP77 Wireless Microphone Body Pack for DHX & DHXR4 Systems

Body Pack Transmitter for the DHX/DHXR4 Wireless Microphone Systems

  • LCD Display
  • 3 Bar Battery Life Indicator
  • Channel Selector
  • On / Off / Mute Button
  • IR Sync Transmitter to Receiver
  • Mic/0/-10dB
  • 10 mW
  • Manually Set Frequency
  • Works with WMC-CGR Charger Station
  • Operated on 2 AA Batteries (up to 6 hours Alkaline)
  • Dimensions: 3.5" x 2.6" x 1" (89 x 65 x 24 mm) (HxWxD)
  • Weight: 3 oz (85 g)

HS-U3BK Uni Headset

This uni-directional headset comes standard with the ECMPSE, TRC, DHT, DHXCTS, & Traveler Headset Systems. It's comfortable wrap around design goes over both ears and helps ensure that this mic will stay in place. The HS-U3BK uni headset microphone can be wired to work with transmitters made by Galaxy Audio®, Shure®, Sennheiser®, AKG®, and Audio Technica®, as well as most other brands of wireless microphone systems.

  • Uni directional headset microphone
  • Hooks over both ears

LV-U3BK

This affordable lav mic comes standard with the ECMPSE, TRC, DHT, DHXCTS, & Traveler Lavalier Systems. The LV-U3BK unidirectional lapel microphone works with transmitters made by Galaxy Audio®, Shure®, Sennheiser®, AKG®, and Audio Technica®, as well as most other brands of wireless microphone systems.

  • Uni-Directional
  • Lapel / Lavalier

WMC-CGR

DC CHARGER: charges two body packs at once.

  • Charges two body packs or handhelds at once
  • Charger for AS-1500R, HH64, HH64SC, HH76, HH76SC, HH76W, HH76WSC & MBP76.

MREWD

Single and Dual Monitor Rack Mount Kit, includes 1 long rack ear, 2 short rack ear, 2 coupler plates, and assorted screws. The MREWD allows for racking a single or two wireless in-ear monitors systems or wireless mic systems in a 1U space. Works with PSE, DHX, CTS, AS-900, AS-1100, & AS-1400 systems.

Antenna Distributor ANT-DISTDC

The Wireless Microphone Antenna Distribution System expands wireless microphone systems only, by splitting one pair of antennas to allow up to four single channel receivers to use the same antennas. 3dB gain compensates for any insertion loss and increases receive signal range (up to 275ft). Low-loss 50 ohm BNC connectors for mounting antenna. Includes rack ears for mounting rack space (1RU) Distributes the antenna for up to 4 Wireless Microphone Systems (PSECTS, and DHX Series). BNC connectors, single rack space, combines power for up to four wireless receivers as well.
Note: Only works with wireless microphone receivers. This Wireless Microphone Antenna Distribution System does NOT work with In-Ear systems.

  • Combines Antennas for up to 4 mic receivers
  • Four DC outputs eliminate individual power supplies
  • 500MHz-900MHz Range
  • Built in Antenna Booster
  • Increase receiver signal rans up to 275 ft more
  • 3dB Gain Compensaton
  • 19" Rack Space

ANT-PDL

Wireless Directional Antenna used to decrease interference to other equipment.  Frequency range 500-900MHz

The UHF wide-band (500-900 MHZ) directional LPDA (log periodic dipole array) antenna reduces outside interference while providing increased send/receive signal range. Each antenna paddle is matched to 50 ohms impedance with a low-loss BNC connector; 7dBi gain. Professional wireless antenna for permanent or temporary installation; mounts to 5/8"-27 threads.

It is suggested that the angle between the paddle antenna and the thransmitter should be from 90º to 120º. Normally the effective range can reach about 300'.

  • 500-900 MHz
  • LPDA antenna
  • 7dBi gain
  • Can mount to mic stand
  • Improves Range

ANT-AMPMIC

Antenna Amplifier utilizes phantom power and a low noise design which covers all UHF frequency points from 500mHz to 900mHz. Metal construction, requires phantom power (9VDC), 50 ohm input/output impedance.

  • Metal Construction
  • Requires Phantom Power (9VDC)
  • 50 ohm Input/Output Impedance
  • 13dB Boost

19.69” BNC Cable & Connector Combo

This Includes:
One Wire BNC Connector Cable (Part# CN-BNCPM) and
One 19.69" (50 cm) RG58 Cable (Part# EXTBNC) for front mounting antenna.

MICCLIPSI

Standard Mic Clip for Handheld Microphones

Specifications
DHX SYSTEM SPECS  
Available Frequencies 120
Frequency Ranges CODE D 584 - 607 MHz
CODE N 518 - 542 MHz
Transmitter Output Level 20 mW
Band UHF
Operating Range Under Typical Conditions 300' (92 m), actual range depends on RF signal absorption, reflection, and interference.
Audio Frequency Response (+/-3 dB) 60 Hz - 16 kHz
Total Harmonic Distortion (+/-30 kHz deviation, 1 kHz tone): <1%
Dynamic Range >90 dB A-weighted
Operating Temperature Range 14° F to 122° F (-10° C to 50° C), battery characteristics may limit this range
   
DHX RECEIVER  
Audio Output Level (+/-30 kHz deviation, 1 kHz tone) XLR Connector (into 600 Ohms load) -12 dBV
1/4" Connector (into 3 k Ohms load) -18 dBV
Output Connections 1 Male XLR Balanced
1 1/4" Unbalanced
Output Impedance XLR connector 200 Ohms
1/4" connector 1 k Ohms
XLR Output Impedance balanced
Pin 1: Ground (cable shield)
Pin 2: Audio +
Pin 3: No Audio -
Sensitivity -93 dBm for 30 dB
Image Rejection >90 dB
Casing Metal Chassis EIA STANDARD 1/2 U
Dimensions 1.7" x 8.3" x 6.3" (45 x 212 x 160 mm) (HxWxD)
Weight 31.7 oz (900 g)
Power Requirements 12-18 V DC at 500 mA, supplied by external power supply
   
HH65 & HH65SC HANDHELD TRANSMITTER  
Max Audio Input Level 0 dBV
Gain Adjust Trim Pot
RF Output 20 mW
Frequency Response 60 Hz- 15 kHz
Dimensions HH65: 9.5" x 2.1" (242 x 54 mm) (LxDia)
HH65SC: 9.6" x 2" (243 x 50 mm) (LxDia)
Weight 10.6 oz (300 g)
Power Requirements 2 "AA" size alkaline or rechargeable batteries
Battery Life About 6 hours (alkaline)
   
MBP77 BODY PACK TRANMITTER  
Max Audio Input Level 0 dBV maximum at mic gain position
+10 dBV maximum at 0 dB gain position.
+20 dBV maximum at -10 dB gain.
Gain Adjust Mic / 0 dB / -10 dB
RF Output 20 mW
Input Impedance 470 k Ohms
Dimensions 3.5" x 2.6" x 1" (89 x 54 x 24 mm) (HxWxD)
Weight 3.0 oz (85 g) (without batteries)
Power Requirements 2 "AA" size alkaline or rechargeable batteries
Battery Life About 6 hours (alkaline)
Downloads
DHX Quick Start Guide ( PDF - 3.07 MB )
Manual ( PDF - 10.11 MB )
DHX Cut Sheet ( PDF - 0.59 MB )
Frequencies ( PDF - 9.95 MB )
Reviews (0)

Reviews

There are no reviews yet.

Leave a customer review

Your email address will not be published. Required fields are marked *

Share this product

Cart
Back To Top
Search