skip to Main Content

ECD Wireless Microphone System

Rated 0 out of 5
(be the first to review)
Description

THIS PRODUCT HAS BEEN DISCONTINUED AND REPLACED BY THE EDX.

The ECD Series is a dual channel wireless system. The ECD features 2 internal antennas (1 for each receiver), 16 selectable channels on each receiver, and IR Sync from receiver to transmitter. The ECD has one ¼” output on the back of the unit. The output is controlled by a volume control for each receiver, located on the front of the unit.

  • 150′ Range
  • Dual Channel Receiver
  • 16 Selectable Channels
  • UHF Frequency
  • Internal Antennas
  • IR Sync Transmitter to Receiver

ECDR Receiver

  • AF & RF Indicators
  • IR Sync
  • 1 Mixed ¼” Output
  • 2 Internal Antennas (Non-Diversity)
  • Rugged Plastic Casing

HH38 Transmitter

  • Dynamic Cardioid
  • On/Off Switch
  • Plastic Casing
  • IR Sync w/ receiver

MBP38 Transmitter

  • IR Sync w/ receiver
  • Mic/0dB/-10 dB pad
  • On/Off/Standby Switch
  • Durable Plastic Casing
Configurations

ECDR/HH38

This system includes the ECDR Receiver and 2 HH38 Handheld Transmitters.

ECDR/38SS

Headset Microphones: Uni-Directional. This system includes the ECDR Receiver, 2 MBP38 Body Pack Transmitters, and 2 HS13-UBK Headset Microphones.

ECDR/38SV

Headset and Lavalier Microphones: Uni-Directional. This system includes the ECDR Receiver, 2 MBP38 Body Pack Transmitters, the HS13-UBK Headset Microphone, and the LV13-UBK Lavalier Microphone.

ECDR/38VV

Lavalier Microphones: Uni-Directional. This system includes the ECDR Receiver, 2 MBP38 Body Pack Transmitters, and 2 LV13-UBK Lavalier Microphones.

ECDR/HHBPS

Headset Microphone: Uni-Directional. This system includes the ECDR Receiver, the HH38 Hand Held Transmitter, the MBP38 Body Back Transmitter, and the HS13-UBK Headset Microphone.

ECDR/HHBPV

Lavalier Microphone: Uni-Directional. This system includes the ECDR Receiver, the HH38 Hand Held Transmitter, the MBP38 Body Back Transmitter, and the LV13-UBK Lavalier Microphone.

Accessories

MC-SC

Spring Mic Clip

Power Supply PS-13.5-.35.5

Microphone power supply for AS-900T, AS-1100T, AS-1400T, VESR, VSCR, ECDR, EDXR, ECMR, PSER, DHTR, & DHXR.

  • 13.5 Volt 300 mA-
  • 5.5 mm PLUG

Universal Power Adaptor AS-UA12-14.5

Universal Power Adaptor. The AS-UA12-14.5 supplies 12V DC at 1000mA to Our Wireless Microphone & Monitor systems such as the DHT, DHX, DHTRQUAD, DHXR4, PSE, ECM, ECD, EDX, AS-900, Galaxy Audio AS-1100 & AS-1800 using the common 5.5mm barrel plug with center positive. The universal AC power adaptor comes with 4 different AC plug adaptors, and will accept any input voltage from 100 to 240v AC, 50-60Hz, which means it will work in nearly every country on the planet.

  • 12V DC 1000mA  
  • 5.5mm PLUG
  • Converts Systems To Accept 230 VAC.
Specifications
System Available Channels 16
System Frequency Range CODE D 584-607 MHz
CODE L 655-679 MHz
System Transmitter Output Level 10dBm
System Band UHF
System Operating Range Under Typical Conditions 150' (50m), actual range depends on RF signal absorption, reflection, and interference.
System Audio Frequency Response (+/-3dB) 60Hz~16kHz
System Total Harmonic Distortion (+/-30kHz deviation 1kHz tone): <1%
System Dynamic Range >90dB A-weighted
System Operating Temperature Range 14ºF to 122ºF (-10 Cº to +50 Cº), battery characteristics may limit this range.
ECDR Audio Output Level (+/-30kHz deviation, 1kHz tone) ¼" connector (into 3kOhms load) -18dBV
ECDR Output Impedance ¼" connector 1kOhms
ECDR Sensitivity -92dBm
ECDR Image Rejection >92dB
ECDR Dimensions 1.7" x 8.3" x 6.3" (42mm H x 210mm W x 116mm D)
ECDR Weight 12oz (340g)
ECDR Power Requirements 12-18 V dc at 300mA, supplied by external power supply
HH38 Max Audio Input Level 0dBV
HH38 Dimensions 10.8" x 1.9" dia. (275mm x 47mm dia.)
HH38 Weight 6.9oz. (195 g) (without batteries)
HH38 Power Requirements 2 “AA” size alkaline or rechargeable batteries
HH38 Battery Life About 8 hours
MBP38 Audio Input Level 0 dBV to +20 dBV
MBP38 Gain Adjustment Range 30dB
MBP38 Input Impedance 5kΩ
MBP38 Dimensions 3.3" x 2.6" x 1" (85mm H x 65mm W x 23mm D)
MBP38 Weight 2.8oz (80 g) (without batteries)
MBP38 Power Requirements 2 “AA” size alkaline or rechargeable batteries
MBP38 Battery Life About 8 hours
Downloads
Manual ( PDF - 0.96 MB )
Cut Sheet ( PDF - 0.66 MB )
Reviews (0)

Reviews

There are no reviews yet.

Leave a customer review

Your email address will not be published.

Share this product

Cart
Back To Top
Search