DHT Wireless Microphone System

Rated 0 out of 5

(be the first to review)

Description

THIS PRODUCT HAS BEEN DISCONTINUED AND REPLACED BY THE DHX.

The DHT packs the tools for the pro. The DHT has Auto Scan, where it will search for an available frequency to use, and then IR Sync the frequency to a transmitter. The large LCD display shows channel number, frequency, lock mode, and volume output. The DHT receiver has an easy to read RF and AF indicator. The UHF diversity antennas ensure quality operation. The DHT works great with any 76 or 64 Series transmitter.

300′ Range
UHF Frequency
Diversity Antennas
Single Rack Mount Included

DHTR Receiver

Auto Scan
LCD Display
Frequency with Channel Group Selector
AF/RF Indicators
IR Sync
Diversity Antennas
Squelch Adjustment
XLR/¼” Output

MBP76 Transmitter

IR Sync
Mic/0/-10 dB
Channel Selector
On/Off / Mute Button
3 Bar Battery Life
Indicator
Button Lock
LCD Display
10 mW

HH64 Transmitter

Cardioid Dynamic Element
LCD Display (Battery Life Indicator Group and Channel Indicator)
4 Battery Life Indicator
Gain Adjustment
IR Sync
10 mW

HH64SC Transmitter

Super Cardioid with Condensor
LCD Display (Battery Life Indicator Group and Channel Indicator)
4 Battery Life Indicator
Gain Adjustment
IR Sync
10 mW

Configurations

	DHTR/HH64 This system includes the DHTR Receiver and the HH64 Hand Held Transmitter.
	DHTR/HH64SC This system includes the DHTR Receiver and the HH64SC Hand Held Transmitter.
	DHTR/76HS Headset Mic: Uni-directional, Frequency Response 50Hz-18kHz. This system includes the DHTR Receiver, MBP76 Body Pack Transmitter, and the HS-U3BK Headset Microphone.
	DHTR/76LV Lavalier Mic: Uni-element, Frequency Response 50Hz-19kHz. This system includes the DHTR Receiver, MBP76 Body Pack Transmitter, and the LV-U3BK Lavalier Microphone.
	DHTR/76GTR Guitar Cable: Guitar/Instrument Cable, 1/4" to mini XLR connector, TA3F connector, use with Guitar or Bass Guitar. This system includes the DHTR Receiver, MBP76 Body Pack Transmitter, and the AS-GTR Guitar Cable.
	DHTR/W76 Wireless Shockmount: 16 Selectable Channels, XLR Mic Input, On/Off Switch, Low Battery LED. This system includes the DHTR Receiver and the SM-W76 Shockmount.

Accessories

	MRTD/P/T THIS PRODUCT HAS BEEN DISCONTINUED DUAL RACK MOUNT TRAY FOR DHTR, TRCR, & PSER: Will hold two transmitters in a single rack space. Mounts two Receivers 1 Rack Space
	WMC-CGR DC CHARGER: charges two body packs at once. Charges two body packs or handhelds at once Charger for AS-1500R, HH64, HH64SC, HH76, HH76SC, HH76W, HH76WSC & MBP76.
	19.69” BNC Cable & Connector Combo This Includes: One Wire BNC Connector Cable (Part# CN-BNCPM) and One 19.69" (50 cm) RG58 Cable (Part# EXTBNC) for front mounting antenna.
	ANT-AMPMIC Antenna Amplifier utilizes phantom power and a low noise design which covers all UHF frequency points from 500mHz to 900mHz. Metal construction, requires phantom power (9VDC), 50 ohm input/output impedance. Metal Construction Requires Phantom Power (9VDC) 50 ohm Input/Output Impedance 13dB Boost
	Antenna Distributor ANT-DISTDC The Wireless Microphone Antenna Distribution System expands wireless microphone systems only, by splitting one pair of antennas to allow up to four single channel receivers to use the same antennas. 3dB gain compensates for any insertion loss and increases receive signal range (up to 275ft). Low-loss 50 ohm BNC connectors for mounting antenna. Includes rack ears for mounting rack space (1RU) Distributes the antenna for up to 4 Wireless Microphone Systems (PSE, CTS, and DHX Series). BNC connectors, single rack space, combines power for up to four wireless receivers as well. Note: Only works with wireless microphone receivers. This Wireless Microphone Antenna Distribution System does NOT work with In-Ear systems. Combines Antennas for up to 4 mic receivers Four DC outputs eliminate individual power supplies 500MHz-900MHz Range Built in Antenna Booster Increase receiver signal rans up to 275 ft more 3dB Gain Compensaton 19" Rack Space
	MC-SC Spring Mic Clip6

Specifications

DHTR Receiver
System Frequency CODED	584~607MHz
System Frequency CODE L	655~679MHz
Audio Output Level	(+/-30kHz deviation, 1kHz tone) XLR connector (into 600 Ohms load) -12dBV ¼" connector (into 3kOhms load) -18dBV
Output Impedance	XLR connector 200Ohms ¼" connector 1kOhms
XLR Output	Impedance balanced
XLR Pin 1	Ground (cable shield)
XLR Pin 2	Audio
XLR Pin 3	No Audio
Sensitivity	-93dBm for 30dB SINAD, typical
Image Rejection	>90dB
Power Requirements	12-18 V dc at 400mA, supplied by external power supply
Dimensions	1.7" x 8.3" x 6.3" (44mm H x 212mm W x 160mm D)
Weight	31.75oz (900 g)

Handheld & Body Pack Transmitters	------------------------------------------------------------------

System Transmitter Output Level	10dBm
System Band	UHF
System Operating Range	Under Typical Conditions 300' (92m), actual range depends on RF signal absorption, reflection, and interference.
System Audio Frequency Response	+/-3dB 60Hz~16kHz
System Total Harmonic Distortion	+/-30kHz deviation 1kHz tone <1%
System Dynamic Range	>90dB A-weighted
System Operating Temperature	Range 14ºF to 122ºF (-10 Cº to +50 Cº), battery characteristics may limit this range.

Handheld Microphones HH64 & HH64SC	------------------------------------------------------------------

Max Audio Input Level	0dBV
Handheld Battery Life	About 6 hours
Handheld Power Requirements	2 “AA” size alkaline or rechargeable batteries
Dimensions	HH64: 9.5" x 2.1" dia. (242mm x 54mm dia.) HH64SC: 9.6" x 2" dia. (243mm x 50mm dia.)
Handheld Weight	10.6oz. (300 g) (without batteries)

Body Pack Transmitter MBP76	------------------------------------------------------------------

Max Audio Input Level	0 dBV maximum at mic gain position +10 dBV maximum at 0 dB gain position +20 dBV maximum at 10 dB gain position
Gain Adjustment Range	30dB
Input Impedance	470kΩ
Dimensions	3.5" x 2.6" x 1" (89mm H x 65mm W x 24mm D)
Weight	3.0oz (85 g) (without batteries)
Power Requirements	2 “AA” size alkaline or rechargeable batteries
Battery Life	About 6 hours