skip to Main Content

HSRG Monitor

Or

Rated 0 out of 5
(be the first to review)
Description

THIS PRODUCT HAS BEEN DISCONTINUED AND REPLACED BY THE HS7.

The HOT SPOT monitor series has been the world’s number one personal monitor since it’s invention in 1977. There are two basic concepts that have led to the continued success of the HOT SPOT. The first concept was to bring the monitor closer to the performer. Second, was to create a monitor that projects mid/high range frequencies; a frequency tailoring that Galaxy calls controlled bandwidth. By bringing the monitor closer, the stage volume can be reduced, which, in turn, helps clean up the front of house mix. Its integral volume control allows the performer to have more control over his/her volume and to hear the other musicians on stage.

The HOT SPOT’s frequency range is tailored for the mid/high range (150Hz-18kHz). As live performers know, the mid/high range carries all the vocal clarity. The HOT SPOT is most effective, because of the fact it can be placed closer to the performer, its use of controlled bandwidth, and most importantly, its two NEOLITE high-efficiency high power drivers!

The HOT SPOT features two of Galaxy’s new NEOLITE neodymium drivers, each rated at 100 watts continuous. This gives the HOT SPOT its rating of 200 watts @ 16 ohms. The HOT SPOT cabinet is constructed of black high impact ABS and has an attractive cloth grill. The back of the unit features two ¼” input jacks. One serves as the speaker’s input; another makes it possible to link multiple HOT SPOTS. All HOT SPOTS have a built-in stand mount which allows them to be easily mounted to a microphone stand. SA-1 Stand adaptor included.

Specifications
Frequency response 250 Hz –15 kHz
Power handling capacity 200 Watts
Sensitivity (1 watt @ 1Meter) 92 dB (1 kHz octave band)
Maximum SPL (200 watts @ .5 meter): 126 dB
Speaker complement Two NEOLITE Neodymium, ferro fluid cooled 5 -inch drivers .86 lbs (.39 kg)
Nominal impedance 16 ohms
Input connection One Speakon® style input & Two ¼ -inch jacks wired in parallel
Enclosure Materials High impact ABS plastic
Color Black case with cloth covered ABS grille
Included SA- 1 spun aluminum stand adaptor allows HOT SPOTS to be used on KM style mic stands.
Dimensions 6.75-inches x 10.94-inches x 6-inches (171 mm x 278 mm x 152 mm)
Net weight 4.5 lbs. (2.04 kg)
Shipping weight 6.1 lbs. (2.8 kg)
Downloads
Manual ( PDF - 0.73 MB )
Cut Sheet ( PDF - 0.38 MB )
Bracket Instructions ( PDF - 0.05 MB )
Polar Charts ( PDF - 0.35 MB )
Reviews (0)

Reviews

There are no reviews yet.

Leave a customer review

Your email address will not be published. Required fields are marked *

Share this product

Cart
Back To Top
Search