arrow-right chevron-right chevron-left website reverb-nation bandcamp facebook google-plus instagram youtube twitter soundcloud vimeo myspace search language home location bubbles light thumbs-up thumbs-down
Skip to content

Speaker Parts & Accessories

SAYBLA4-9

White Yoke bracket for LA4PM Line Array.

More Details

THSPM100

70volt / 100watt autoformer for use in distributed systems

More Details

AS-TV10 Cover

Protective Slip Cover for TV10 Mesh front so audio can pass thru while covering unit. Easy access to controls & power input Access side can be unzipped and velcroed open Convenient side pockets for storage Works two ways! Can be turned 180º

More Details

CR-M8

Fly Mount Hardware for use with Core 12 & Core 15 Speakers. Sold in pack of 3.

More Details

SW6.5

NEOLITE 6.5" WOOFER The NEOLITE 6.5" Woofer features a 3.4oz Neodymium magnet mounted on an ABS plastic basket. The high excursion cone and thick surround allow for low frequencies to be produced cleanly. The voice coil gap contains Ferro Fluid to provide advanced cooling and dependability. The NEOLITE 6.5" has a frequency range of 50-8kHz with a sensitivity of 88dB, 1W/1M. Direct replacement for the PA6S & PA6SR Speakers.

More Details

STN1.5

NEOLITE 1.5" TWEETER The 1.5" Neolite Titanium Dome Tweeter features fluid cooling and a strong neodymium magnet. The great mid range quality of this driver ensures clear, intelligible vocals. It has the capability of producing 60 watts of screaming mids and highs. This tweeter has a frequency response of 1kHz-20kHz and a magnet weight of 33.5 grams. Direct replacement for PA6S & PA6SR Speakers. Units ship in the plastic mounting ring.

More Details

PHSI

Replacement HOT SPOT mic stand insert.  ABS glue required for reinstallation. Oatey PVC, CPVC and ABS cement and cleaner recommended. Can be acquired at most hardware stores.

More Details

SA-YBRF

HOT SPOT BRACKET/ WALL MOUNT SAYBRF Yoke bracket retrofit kit for mounting HOT SPOT to walls and ceilings. Available in black or white. NOTE: Only works with HSVC, HSRG, & PA5XD HS7, PA6S, & PA6S require part: SAYB10-0 (black) SAYB10-9 (white)

More Details

SC-2

25 foot 16 Gauge cable 1/4" Cable ¼" - ¼" Plugs with Hook and Loop Cable Lock ¼" Plugs allow you to daisy chain multiple HOT SPOTS.

More Details

SAHSVCSWK

6 Position Stepped Attenuator with Knob for previous models of HOT SPOTs with volume control. Works with HS7, HSVC, MSVC

More Details

SAHS7SWK

6 Position Stepped Attenuator with Knob for current models of HOT SPOTs with volume control. Works with models HS7, HSVC, MSVC

More Details

S5N-8

Galaxy Audio introduces the 5-inch driver of the future! Like its predecessor, this speaker is tailored to reproduce a frequency range from 150Hz-18kHz. The magnet of the NEOLITE is manufactured from a material called Neodymium, a rare earth element. Neodymium has an extremely intense magnetic field in comparison to its weight. The NEOLITE is as powerful as the previous 5” driver, yet weighs 1/3 as much. In addition, our NEOLITE driver is shielded. This allows the speaker to be placed near sensitive equipment that may be affected by a strong magnetic field, such as a TV or a computer monitor. The NEOLITE can handle 100 watts continuous/200 watts max! How is it possible for a speaker this size to handle power like that? A speaker is only as good as its ability to dissipate heat. The NEOLITE has a patented cooling system called SUPER COOL. SUPER COOL is based on three different methods of heat transfer.   1. Conduction  The speaker is ferrofluid cooled.  ferrofluid is a liquid cooling agent in which the voice coil is immersed. This conducts heat away from the voice coil to the surrounding motor structure. The aluminum frame of the NEOLITE helps conduct heat away from the motor. 2. Convection The NEOLITE employs three venting chambers, which provide air flow caused by cone movement. Designed into the cast aluminum frame are cooling fins and vent holes. These fins and vent holes are strategically placed around the speaker to maximize airflow to help dissipate heat.   3. Radiation The aluminum frame is painted black. The black paint helps to radiate heat away from the frame. The NEOLITE features an edge wound voice coil. An edge wound voice coil increases the efficiency of the speaker as well as produces a better high frequency response. The NEOLITE is truly a unique speaker. It was designed by our engineering team to be unlike anything available today. We have maintained the same great sound in a much lighter package. If you are looking to put the NEOLITE in your own cabinet, it can be front or rear mounted in the enclosure. The NEOLITE is a speaker unmatched by any other 5” speaker. The Galaxy Audio S5N-8 controlled bandwidth transducer delivers maximum sound levels and unsurpassed durability under the most stringent operating conditions. It features an aluminum frame, 7.4 -ounce neodymium magnet structure, Super Cool cooling technology, underhung voice coil, and linear spider. The one inch voice coil includes a Kapton former. Ferrofluid cooling reduces distortion and power compression while increasing speaker life. The S5N-8 is optimized for use in infinite baffle/acoustic suspension type enclosures. Galaxy’s new 5-inch driver retains all the sound characteristics of the original driver without sacrificing sound, power, or reliability. Galaxy’s new 5-inch professional loud speaker was engineered using the light weight metal, NEODYMIUM. In short, this makes the driver weigh 1/3 as much as the original driver designed over 25 years ago.

More Details

MSA-1

Spun aluminum stand adapter Will mount a unit to any microphone stand. Works with all HOT SPOT MONITORS.

More Details

Hot Spot Yoke Bracket / Wall Mount YBHS

Yoke Bracket and hardware kit for HS7 and PA6S/PA6SR. Will allow for mounting to wall or mic stand (MSA-1 stand adaptor not included with bracket, but is included with the HS7 & PA6S/PA6SR) Works with HS7 and PA6S/PA6SR Models Bracket can Mount to Walls or Ceilings Mount Vertically or Horizontally to Microphone Stand if used with the MSA-1 Adapter (included with HS7 & PA6S/PA6SR) Multiple Mounting Points for Tight Spaces and Reduced Visibility

More Details

Mic Boom Adaptor MBA

MIC BOOM ADAPTOR: mounts to the top of a PA6S, PA6SR, or HS7. This adaptor allows most microphone booms to be mounted on the top of the Hot Spot to eliminate the need for a stand for the Hot Spot and a stand for the microphone and boom. Works With 3/8" & 1/2" mic boom.

More Details

SAYBLA4-0

Black Yoke bracket for LA4PM Line Array.

More Details

Saddle Bag Sand/Water Bag SDB40

The Saddle Bag Sand/Water Bag is designed to help improve the stability of speaker, keyboard, mic, lighting stands and many other types of stands. Also great as a boom counterweight. The Saddle Bag is constructed of a durable reinforced vinyl. When filled with sand (not included) the Saddle Bag weighs approximately 40lbs and 25lbs when filled with water. The filled Saddle Bag will help stabilize a top- heavy stand. Works great on keyboard, speaker, mic, lighting, and many other types of stands. Great for: bands, churches, theater, broadcast, recording & video production Dual wing design Nylon handle with clip May be filled with sand or water  Helps protect equipment from damage and keeps stands upright and stable Sand can be acquired at most home improvement centers, concrete supply warehouses, landscaping supply houses or a sand blasting supply company. Tip: Coarse dry commercial sand works best. Use a funnel for faster fills. Equipped with large 1-inch inner diameter plugs for ease of filling. WARNING 1. We are not responsible for any damage caused by the use or misuse of the bag.  2. The water bag should not be used near electrical wiring.  3. Only dry sand should be used in a dry bag.  4. Water should not be left in the bag for long periods.  5. Do not subject the bag to freezing weather when filled with water.  6. The bag is not intended as a flotation device.

More Details

Life Saver Sand/Water Bag LSR38

The Galaxy Audio Life Saver is a unique equipment stand stabilizer that may be used in a variety of ways in Audio, Video, Lighting, and Theatre applications. Any mic or speaker stand may become unstable because of a top-heavy center of gravity, a boom extended laterally, or simply because the stand is set on an uneven surface. When filled with Sand or Water the Life Saver provides enough weight at the bottom to stabilize most mic and speaker stand applications. The doughnut shape of the LSR38 ensures that the Life Saver will stay on the base of the stand, even if the stand is pushed or bumped. The LSR38 weighs 38lbs. when filled with sand, and 22lbs. when filled with water. The durable reinforced vinyl material and easy-fill water tight design allow the user to transport the Life Saver empty, and fill with water on location. The LSR38 dimensions are: 16" O.D. x 6" I.D. x 3" Thick. The Life Saver will pay for itself the first time it prevents your expensive mics or speakers from hitting the floor. (Sand/water not included) May be filled with sand or water  Protects mics and speakers from damage Helps keep microphone, speaker and lighting stands upright Sand/Water not included Unique doughnut shape keeps bag on the stand

More Details

Traveler Tote Bag BAGTV

Galaxy’s TRAVELER TOTE BAG holds a TV8U or up to two of either or both TV5i and TV5X. The TRAVELER TOTE BAG also has storage for additional accessories. TRAVELER TOTE BAG is constructed of high quality heavy duty water resistant nylon. TRAVELER TOTE BAG comes with a detachable shoulder strap, removable inner dividers, wheels and a retractable handle.

More Details

AS-DCBPTR Compact Transmitter Charger

Drop-in cradle charger for TVH2, TVBPT and AS-TVBPR. Charges two units at one time.

More Details

Body Pack Charger AS-DCTVMBP

DC Charger for charging up to 2 TVMBP bodypacks installed with rechargeable batteries.

More Details

Speaker Accessories Parts & Accessories

AS-TV8 Cover

Protective Slip Cover for TV8 v1 or TV8U Mesh front so audio can pass thru while covering unit. Easy access to controls & power input Access side can be unzipped and velcroed open Convenient side pockets for storage Works two ways! Can be turned 180º

More Details